Jet Edge Mobile Waterjet Cutters Helped Stop 1991 Kuwait Oil Fires

Can you believe it's been 24 years since the Kuwait oil fires?

Jet Edge, a very young company at the time, helped put out the fires by supplying mobile waterjet cutting equipment that was used to cut off the mangled well heads so they could be capped.

To this day, waterjets are considered the ideal cold cutting method for oil industry applications as they cut without heat or flames.  Portable waterjet cutting systems are commonly used to cut pipelines and to cut petroleum storage tank door sheets and floors.  They can even be used underwater.

See www.jetedge.com to read more about how Jet Edge helped put out the Kuwait oil fires.

Portable Water Jet Cutter Cuts Circles, Radiuses

Jet Edge introduces the Spyder Abrasivejet Radius and Circle Cutting System, a portable abrasive water jet cutting system designed for use in potentially hazardous environments.

The Spyder Abrasivejet Radius and Circle Cutting System can be set up on the side of tanks, small vessels and large diameter piping. It is held in place by vacuum cups and features a self-aligning centering pin for fast and reliable setup. Motion components are made from non-ferrous materials, and cutting head manipulators are powered by pneumatic motors, making the Spyder suitable for use in all environments. A master control panel allows operators to control the cutting head manipulators, direction, speed of travel, abrasive delivery and vacuum components from one location.

The Jet Edge Spyder Radius and Circle Cutting System is available in two sizes: 1” to 6.5” insider diameter/16” to 48” outside diameter and 3” to 12.5” inside diameter/27.5” to 56” outside diameter. The Spyder water jet cutting system is powered by Jet Edge’s 60,000 psi (4,100 bar) waterjet intensifier pumps, which are available in electric or diesel models up to 280HP.

More Information

For more information about Jet Edge waterjets, visit http://www.jetedge.com/ or call 1-800-JET-EDGE (538-3343).

INFORMATION REQUEST FORM

About Jet Edge

Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).

Jet Edge Diesel Water Jet Pump Ideal for Mobile Cutting

Water jet manufacturer Jet Edge, Inc., introduces the 80hp, 60,000 psi iP60-80DS diesel-powered water jet intensifier pump.


The iP60-80DS water jet pump is capable of producing up to 1.35 gpm (5.1 L/m) of ultra-high pressure water for mobile water jet cutting applications, and is especially suited for cold cutting in environments where heat and flames are restricted. Built with the contractor in mind, the iP60-80DS is powered by a reliable four-cylinder Cummins turbocharged diesel engine and is designed for portability and ease of maintenance. Intensifier components can be accessed without having to get into the hydraulic center section and hydraulic rod seal. No special tools are required. The Jet Edge iP60-80DS waterjet intensifier pump is made in the U.S.A.

For more information about Jet Edge waterjet pumps, visit http://www.jetedge.com/ or call 1-800-JET-EDGE (538-3343).

About Jet Edge

Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail mailto:esales@jetedge.com or call 1-800-JET-EDGE (538-3343).

Mobile Waterjet Cutting System Introduced by Jet Edge

Jet Edge, Inc. is pleased to introduce its new Hydraulic Versacutter portable waterjet cutting and beveling system.

The Jet Edge Hydraulic Versacutter is a hydraulically controlled mobile waterjet system that moves along rigid or flexible track to cut flat or curved surfaces. It cuts with a 60,000 psi (4,100 bar) abrasive waterjet.

The Versacutter is ideal for cutting pipelines, steel reinforced concrete, reactor vessels and fabricated metal structures. It cuts without flames and does not generate heat. This makes it possible for operators to cut in areas where flames are restricted. It also eliminates heat-affected zones.

Jet Edge's Hydraulic Versacutter water jet system is powered by Jet Edge's 60,000 psi (4,100 bar) waterjet intensifier pumps, which are available in electric or diesel models up to 280HP.

Like all Jet Edge products, the Hydraulic Versacutter is proudly made in the U.S.A.

For more information, visit www.jetedge.com, e-mail sales@jetedge.com, call 1-800-JET-EDGE (538-3343) or 763-497-8700.

REQUEST INFORMATION