The Perfect Water Jet Cut Bottle Opener for National Beer Lover's Day

Happy National Beer Lover's Day!

A true lover of beer would never be caught without a bottle opener on a day like today.  That would be worse than going fishing without bait.

Do you have a favorite bottle opener?  Mine is my trusty Jet Edge waterjet cut sample part that we cut for prospective customers at the big machine tool trade shows like FABTECH and IMTS.
I haven't found a bottle opener that works better than my Jet Edge opener.

Our waterjet test lab is working on this year's FABTECH bottle opener.  What will it be?  You'll have to stop by our booth to find out.  Bring beer!

See Jet Edge's 5-Axis Water Jet Cutting Demonstrations at FABTECH

Learn more

How to Stop Small Parts from Falling into Your Water Jet Tank

If you have ever needed to waterjet cut small parts, you know how challenging it can be to prevent them from falling into the waterjet tank.

Luckily, there are several ways to stop your parts from going for a swim.

Sticks - One of the oldest tricks in the book is to place small sticks in the kerf.  This puts pressure on the part so it doesn't fall in.  You can use toothpicks, coffee stir sticks or even shish kebab sticks.

Place toothpicks in the kerf to keep small parts from falling in.
This material is sparking because it is titanium
and is so hard that the waterjet abrasive garnet sparks when it hits it.

Program in a small tab - Using your waterjet CAD/CAM/Nesting software, program in a small tab on the part so it remains slightly attached to its source material after it has been cut.  Once you remove the material, you can wiggle the part free and then grind away the tab.  This is what Jet Edge does at the FABTECH expo.

Add a small tab to your program to hold waterjet parts in place.

Cut on Waterjet Bricks - If you cut a lot of small parts, it would be wise to invest in plastic waterjet bricks.  The brick's flat surface will prevent your parts from falling in the tank.  You can order water jet bricks from Jet Edge's water jet parts department.

Plastic bricks can prevent small parts from falling in your waterjet.

Visit Jet Edge Waterjets at FABTECH

We'd love to meet you in person at FABTECH, Nov. 16-18 in Las Vegas.  If you need a free expo pass, please contact your Jet Edge waterjet representative.  See you there!

It's Time to Buy a Water Jet System

Summer is flying by, IMTS and FABTECH are right around the corner, and it's time to buy that water jet system to take advantage of this year's U.S. tax incentives for capital equipment.

If you're still torn between water jet and plasma or water jet and laser, let Jet Edge make a case for choosing a waterjet system.

Water jet is by far the most versatile piece of fabrication equipment you could ever buy for your shop. It cuts nearly any material, including reflective and non-conductive materials.  It cuts incredibly thick metals.  It has a very small kerf, allowing you to tightly nest parts to maximize material use.

A cold-cutting process, water jet cuts without HAZ or slag so you don't have to waste hours grinding away parts so you can weld them.

Water jet doesn't kick up a cloud of dust, making it great for cutting fiberglass, fiber cement and composite materials.

And if you don't like breathing in dust, then you certainly can't like breathing in noxious fumes and chromium smoke.  Waterjets cut without fumes and smoke, allowing you to breathe easy.

There are many, many more reasons to choose waterjet.  See our website to get the complete lowdown.

Of course, if you still can't decide, why not buy one of each?  Waterjet, lasers and plasma systems complement each other quite nicely in a fully equipped metal fabrication shop.

Jet Edge Water Jet Systems

Our sales staff can you decide if waterjet is the right tool for you.  Give us a call today to discuss your application.

www.jetedge.com
sales@jetedge.com
+1 763-497-8700
1-800-538-3343
Information Request Form

How Does a UHP Waterjet System Work?

With the fall machine tool trade show season right around the corner, we thought we'd spend the next few days answering a few of the basic questions folks new to waterjet usually have but might be reluctant to ask.

Let's start with the most basic.

How does a precision waterjet cutting system work?

Here's a brief explanation, but if you'd like more details, please see our Waterjet 101 page.

It all starts with ordinary tap water - the same stuff you drink and bathe in.  We then filter that water to remove hardness and impurities and get it to the correct pH, following our recommended water quality guidelines for water jet systems.  The water is then fed into a hydraulic intensifier pump.  Some of the water is used to cool the pump and some of the water is pressurized up to 75,000 psi within an intensifier assembly featuring a hydraulic-powered piston.

The ultra high pressure water (UHP) is then sent to the waterjet cutting head, where it is sent through a very small diameter jewel orifice that focuses it into a high velocity waterjet.  This water only waterjet cuts soft materials including food, foam, rubber, carpet and gasket materials.  In fact, a water only waterjet likely cut all of the carpet in your vehicle, the rubber mats at your gym and the baby carrots we all love to snack on.

Most water jet cutting applications are actually abrasive waterjet cutting applications.  An abrasive, typically garnet, is added to the waterjet, creating a powerful abrasivejet that can cut just about anything, from tool steel to modern composites and even super alloys.

Abrasivejets work just like sandpaper.  Finer grit abrasive can be used for a nice smooth finish, or coarser grit can be used for faster rough cutting applications.

< Learn More About Waterjets

Jet Edge is coming to FABTECH Nov. 16-18 in Las Vegas.  

We hope to see you there!

Request a Free Pass to FABTECH

See Jet Edge Waterjets at FABTECH Next Week!

Jet Edge will be exhibiting our latest waterjet technology at FABTECH next week in Chicago.  Come see us in booth 2739.

During FABTECH, we will demonstrate our Mid Rail Gantry waterjet cutting system and 90KSI xP90-100 X-Stream waterjet intensifier pump. 

Jet Edge Mid Rail Gantry Waterjet System


Capable of producing complex parts out of virtually any material, the Jet Edge Mid Rail Gantry waterjet cutting machine features an exposed tank that easily accommodates overhead loading. It comes standard with one abrasivejet cutting head; a second cutting head can be added to increase productivity. Optional mirroring capabilities make it possible to cut part cycle time in half.

The Mid Rail Gantry is ball-screw driven for higher accuracy. Its sturdy heavy-wall tubular steel construction eliminates vibration and increases longevity. The Mid Rail Gantry utilizes an industrial PC controller and can be configured so that all three axes are fully programmable (Z optional). It also features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals and positive air pressure. The Jet Edge Mid Rail Gantry waterjet machine is available in many sizes, including 5’x5’, 5’x13’, 8’x5’, 8’X13’, 13’x13’, 21’x5’, 21’X13’ and 24’x13’.

X-Stream Waterjet Intensifier Pumps

Jet Edge will exhibit its 100hp, 90KSI X-Stream xP90-100 waterjet intensifier pump. Jet Edge’s X-Stream pumps are capable of producing 90,000 psi and support 75,000 psi continuous operating pressure. The X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60KSI water jet pumps, enabling users to increase productivity and reduce part costs.

The X-Stream produces 50% more pressure than a 60,000 psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. Compared to a 60,000 psi pump, typical operating pressures of 75,000 psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. The xP90-100 is capable of producing flow rates of 1.45gpm and supports up to a .017” orifice. Fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. The X-Stream is also available in a 50hp model.

About Jet Edge

Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjets are proudly made in U.S.A.

More Information

For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE or 763-497-8700. Follow us on Twitter @jetedge.

Jet Edge Exhibiting 90,000 PSI Waterjets at FABTECH 2011

Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will demonstrate its 90,000 psi water jet cutting technology at FABTECH, Nov. 14-17 in Chicago. Look for Jet Edge in booth 2739.

During FABTECH, Jet Edge will showcase several innovative precision waterjet cutting products, including its 90,000 psi (6,200 bar) X-Stream waterjet intensifier pumps and Mid Rail Gantry precision water jet cutting machine. Jet Edge technical experts will be available to answer questions about waterjet cutting applications.

Jet Edge Mid Rail Gantry Waterjet System
Capable of producing complex parts out of virtually any material, the Jet Edge Mid Rail Gantry waterjet cutting machine features an exposed tank that easily accommodates overhead loading. It comes standard with one abrasivejet cutting head; a second cutting head can be added to increase productivity. Optional mirroring capabilities make it possible to cut part cycle time in half.

The Mid Rail Gantry is ball-screw driven for higher accuracy. Its sturdy heavy-wall tubular steel construction eliminates vibration and increases longevity. The Mid Rail Gantry utilizes an industrial PC controller and can be configured so that all three axes are fully programmable (Z optional). It also features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals and positive air pressure. The Jet Edge Mid Rail Gantry waterjet machine is available in many sizes, including 5’x5’, 5’x13’, 8’x5’, 8’X13’, 13’x13’, 21’x5’, 21’X13’ and 24’x13’.

X-Stream Waterjet Intensifier Pumps
Jet Edge will exhibit its 100hp, 90KSI X-Stream xP90-100 waterjet intensifier pump. Jet Edge’s X-Stream pumps are capable of producing 90,000 psi and support 75,000 psi continuous operating pressure. The X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60KSI water jet pumps, enabling users to increase productivity and reduce part costs.

The X-Stream produces 50% more pressure than a 60,000 psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. Compared to a 60,000 psi pump, typical operating pressures of 75,000 psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. The xP90-100 is capable of producing flow rates of 1.45gpm and supports up to a .017” orifice. Fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. The X-Stream is also available in a 50hp model.

About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting,
surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjets are proudly made in U.S.A.

More Information
For more information about Jet Edge, visit www.jetedge.com, e-mail sales@jetedge.com or call 1-800-JET-EDGE or 763-497-8700. Follow us on Twitter @jetedge.

INFORMATION REQUEST FORM

Waterjet Webinar Oct. 26 on thefabricator.com!

Don't miss our webinar, "Waterjet Cutting: Tips for Increasing Productivity and Reducing Costs,"
1 p.m. CST, Wednesday, October 26, 2011 on http://www.thefabricator.com/!

During this informative presentation, you will learn how to get the most out of your precision waterjet cutting system by taking advantage of the latest innovations in waterjet technology!

In this Webinar, we will discuss the benefits of 90KSI waterjet cutting VS 60KSI cutting, advancements in nesting software and motion systems, and going green to save some green with garnet removal/recycling and closed-loop water filtration.

***CLICK HERE TO REGISTER!***

Meet Our Presenters:

Jeff Schibley, Jet Edge Great Lakes Regional Manager

Successful Waterjet Sales Professional.  25 years experienced in technical equipment applications, Waterjet Systems and Service with Leading Suppliers Waterjet Equipment.  Skilled at working with customers to identify their manufacturing requirements, define relevant solutions, assisting with ROI and financial justification.  Industries include automotive tier 1&2, B2B, agriculture, aerospace, waterjet cutting, automation, robotic welding, robotic sealing, medical device, plastics, tool and die, metal service centers, pulp and paper, and food. 

Bradley Schwartz, Jet Edge Pacific Regional Manager

Waterjet Technology Enthusiast-Regional Sales Manager with application experience since 1987 in the waterjet industry with a degree in robotics.  Specialized in factory production/automation, emerging technologies, custom applications and software development.  Industries ranging from aerospace, government, shipyard and mobile applications. 

***CLICK HERE TO REGISTER!***

 
 
 

REQUEST INFORMATION

See Jet Edge live waterjet cutting demos at FABTECH Nov. 14-17, Chicago!