Water jet technology companies Jet Edge and Chukar Waterjet will exhibit the latest innovations in portable ultra-high pressure water jet cutting and surface preparation water jetting technology at the International WorkBoat Show, Dec. 1-3 in New Orleans. Look for Jet Edge and Chukar in Booth 3559.
As leaders in the ultra-high pressure waterjet industry, waterjet manufacturer Jet Edge and its applications partner Chukar Waterjet have developed numerous waterjetting tools crucial to the workboat and shipyard industries, including portable water jet cutting machines, precision water jet cutting systems, ultra-high pressure water blasting tools, undersea waterjetting equipment and electric and diesel-powered water jet intensifier pumps. Most recently, in emergency response to the Gulf oil spill, the two companies partnered to develop the first-known waterjet intensifier pump capable of operating at depths below 5,000 feet. BP used the subsea waterjetting system to blast away hydrates that were clogging a containment system.
During International WorkBoat Show, Jet Edge and Chukar will display several water jet tools that are ideal for use in environmentally sensitive marine environments or potentially hazardous areas, including the Jet Edge Hydraulic Versacutter portable linear and pipe cutting system; Gyra Jet LP ultra-high pressure lance for surface preparation, coating and corrosion removal; Ultra Deckblaster walk-behind deck blasting system for removing coatings and corrosion; and the 80hp 60,000 psi iP60-80DS diesel-powered portable water jet intensifier pump. Technical experts from Jet Edge and Chukar Waterjet will be available to answer questions about water jet applications.
Commercialization Partner Sought for Subsea Waterjet Equipment
Jet Edge and Chukar Waterjet are seeking an existing underwater operations technology company with which they can partner to bring their undersea waterjetting equipment to the commercial market. For more information, contact Bruce Kivisto at Chukar Waterjet at 763-497-8731.
Water Jet Equipment on Display at International WorkBoat Show 2010:
Jet Edge iP60-80DS Diesel-Powered Waterjet Intensifier Pump
Jet Edge’s iP60-80DS diesel-powered water jet pump is capable of producing up to 1.35 gpm (5.1 L/m) of ultra-high pressure water for mobile water jet cutting applications, and is especially suited for cold cutting in environments where heat and flames are restricted. The iP60-80DS is powered by a reliable four-cylinder Cummins turbocharged diesel engine and is designed for portability and ease of maintenance. A 36,000 psi conversion kit is available.
Hydraulic Versacutter
Jet Edge’s Hydraulic Versacutter is a portable abrasivejet cutting and beveling system. Rigid and flexible tracks allow the Hydraulic Versacutter to operate on flat or curved surfaces. The system is used in a variety of cutting applications including pipelines, steel reinforced concrete, reactor vessels and fabricated metal structures. It is especially suited for cutting in hazardous zones where flames and heat are restricted. It is powered by a Jet Edge water jet intensifier pump.
Gyra Jet LP
Jet Edge’s Gyra Jet LP is a rotating hand-held water blasting tool that directs up to 55,000 psi (3,800 bar) UHP water for water jet surface preparation, industrial cleaning, coating removal, and concrete demolition. Typical applications are removal of damaged surfaces, preparation for recoating or painting, and stripping corrosion and over-spray. The Gyra Jet uses much less water than a typical pressure washer and, unlike sandblasting, it does not create hazardous airborne dust. It is powered by a Jet Edge water jet intensifier pump.
Ultra Deckblaster
Jet Edge’s Ultra Deckblaster is specifically designed for ultra-high pressure (UHP) waterjet surface preparation, water jet coating removal, and light scarification on flat surfaces such as ship decks. The self-propelled Ultra Deckblaster waterjetting machine operates at pressures up to 55,000 psi (3,800 bar). The Ultra Deckblaster also removes accumulated spillage such as grease, oil and overspray. The Ultra Deckblaster can be connected to an industrial vacuum system to contain waste water, an important consideration in sensitive marine environments. It is powered by a Jet Edge water jet intensifier pump.
About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge water jets are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).
About Chukar Waterjet
Chukar Waterjet is a leader in application and rental of ultra-high pressure (UHP) waterjet mobile equipment, and provides prompt, high-quality waterjet fabrication services and cleaning applications. Chukar Waterjet also is a supplier of high quality parts for waterjet cutting and cleaning equipment, offering a complete line of waterjet replacement parts. For more information about Chukar Waterjet, visit http://www.chukarwaterjet.com/, or call 1-888-497-8749 or (763) 497-8749.
Posts
