Jet Edge is presenting at SigmaTek's Productivity Seminar Series Open House, Oct. 5-8 in Cincinnati.
Friday, Oct. 8 will be completely dedicated to water jet cutting technology, and will include presentations from industry experts, including Jet Edge. Presentations include: SigmaNEST for Waterjet, Waterjet Automation, Advancements in Waterjet Cutting (Jet Edge), Garnet / Garnet Recovery and Intensifier Pumps.
How to Register
Admission to the event is free; you may attend the entire program or just the days that interest you. To register, call SigmaTek at 1-513-595-2023 or visit http://www.sigmanest.com./
Tuesday, September 28, 2010
Monday, September 20, 2010
Tips for Water Jet Cutting Glass
- Reduce the risk of chipping by using a low-pressure pierce of approximately 10,000 psi.
- Reduce low-pressure piercing time from two minutes to 10-15 seconds (depending on thickness) by cutting a tiny circle rather than leaving the jet fixed on one spot.
- 120 grit garnet will produce the best edge quality. If speed is your priority and chipping not a concern, use 80 grit garnet
- Cut at 75,000 psi to increase cut speed by 50-75% and improve edge quality.
- Support glass on a sheet of 3/16” corrugated PVC rather than directly on the metal slats. This reduces the risk of chipping and fogging.
- If your projects require you to frequently raise and lower pressure, install a patented Jet Edge Dual Pressure Valve to save time and prolong water jet pump component life.
- Tempered glass cannot be cut with waterjet.
Information Request Form
Wednesday, September 15, 2010
Portable Water Jet Cutter Cuts Circles, Radiuses
Jet Edge introduces the Spyder Abrasivejet Radius and Circle Cutting System, a portable abrasive water jet cutting system designed for use in potentially hazardous environments.
The Spyder Abrasivejet Radius and Circle Cutting System can be set up on the side of tanks, small vessels and large diameter piping. It is held in place by vacuum cups and features a self-aligning centering pin for fast and reliable setup. Motion components are made from non-ferrous materials, and cutting head manipulators are powered by pneumatic motors, making the Spyder suitable for use in all environments. A master control panel allows operators to control the cutting head manipulators, direction, speed of travel, abrasive delivery and vacuum components from one location.
The Jet Edge Spyder Radius and Circle Cutting System is available in two sizes: 1” to 6.5” insider diameter/16” to 48” outside diameter and 3” to 12.5” inside diameter/27.5” to 56” outside diameter. The Spyder water jet cutting system is powered by Jet Edge’s 60,000 psi (4,100 bar) waterjet intensifier pumps, which are available in electric or diesel models up to 280HP.
More Information
For more information about Jet Edge waterjets, visit http://www.jetedge.com/ or call 1-800-JET-EDGE (538-3343).
INFORMATION REQUEST FORM
About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).
The Jet Edge Spyder Radius and Circle Cutting System is available in two sizes: 1” to 6.5” insider diameter/16” to 48” outside diameter and 3” to 12.5” inside diameter/27.5” to 56” outside diameter. The Spyder water jet cutting system is powered by Jet Edge’s 60,000 psi (4,100 bar) waterjet intensifier pumps, which are available in electric or diesel models up to 280HP.
More Information
For more information about Jet Edge waterjets, visit http://www.jetedge.com/ or call 1-800-JET-EDGE (538-3343).
INFORMATION REQUEST FORM
About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).
Monday, September 13, 2010
Angel Machinery Distributing Jet Edge Waterjets in Wisconsin
Jet Edge is pleased to announce that Angel Machinery is now distributing Jet Edge waterjets in Wisconsin.
Located in Menomonee Falls, Angel Machinery carries a wide variety of metal fabricating machinery, machine tools, tooling and accessories. Angel’s metalworking industry roots extend back to the 1950s, giving the machinery distributor the expertise and experience to help customers select the right manufacturing equipment to meet their needs.
More Information
For more information about Angel Machinery, visit http://www.angelmachinery.com/ or call 262-252-4550.
For more information about Jet Edge, visit www.jetedge.com, call 1-800-JET-EDGE (538-3343), 763-497-8700 or e-mail sales@jetedge.com.
Located in Menomonee Falls, Angel Machinery carries a wide variety of metal fabricating machinery, machine tools, tooling and accessories. Angel’s metalworking industry roots extend back to the 1950s, giving the machinery distributor the expertise and experience to help customers select the right manufacturing equipment to meet their needs.
More Information
For more information about Angel Machinery, visit http://www.angelmachinery.com/ or call 262-252-4550.
For more information about Jet Edge, visit www.jetedge.com, call 1-800-JET-EDGE (538-3343), 763-497-8700 or e-mail sales@jetedge.com.
Subscribe to:
Posts (Atom)
Posts
