Jet Edge will be closed Monday, May 31, in observance of Memorial Day.
For emergency waterjet parts and service, please call our after-hours cell phone at 612-963-0887.
Thursday, May 27, 2010
Thursday, May 13, 2010
See Live Water Jet Cutting Demos at WJTA-IMCA Expo Aug. 17-19, Houston
Water jet manufacturer Jet Edge, Inc., of St. Michael, Minn., will exhibit its Mid Rail Gantry water jet cutting machine at the 2010 WJTA-IMCA Expo, Aug. 17-19 at the George R. Brown Convention Center in Houston. Look for Jet Edge in Booth 829.
During the WJTA-IMCA Expo, Jet Edge will perform live precision waterjet cutting demonstrations on its Mid Rail Gantry waterjet system. Powered by a 60,000 psi or 90,000 psi Jet Edge waterjet intensifier pump (available in 30-200hp models), the Jet Edge Mid Rail Gantry water jet cutting machine features an exposed tank that easily accommodates overhead loading. It is designed to cut virtually any material. Optional mirroring cuts part cycle time in half.
The Jet Edge Mid Rail Gantry water jet system utilizes an industrial PC controller and can be configured so that all three axes are fully programmable (Z optional). It also features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals. The Mid Rail Gantry waterjet system is available in 5’x5’, 8’x5’, and 21’x5’, 8’X13’ and 21’X13’ and 5’x13’ work envelopes.
Jet Edge’s Mid Rail Gantry Waterjet System is proudly made in the U.S.A.
More Information
For more information about Jet Edge, visit www.jetedge.com, e-mail sales@jetedge.com, call 1-800-JET-EDGE (538-3343) or 763-497-8700. For more information about the WJTA-IMCA Expo, visit www.wjta.org, e-mail wjta@wjta.org or call 314-241-1445.
JET EDGE INFO REQUEST FORM
About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).
During the WJTA-IMCA Expo, Jet Edge will perform live precision waterjet cutting demonstrations on its Mid Rail Gantry waterjet system. Powered by a 60,000 psi or 90,000 psi Jet Edge waterjet intensifier pump (available in 30-200hp models), the Jet Edge Mid Rail Gantry water jet cutting machine features an exposed tank that easily accommodates overhead loading. It is designed to cut virtually any material. Optional mirroring cuts part cycle time in half.
The Jet Edge Mid Rail Gantry water jet system utilizes an industrial PC controller and can be configured so that all three axes are fully programmable (Z optional). It also features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals. The Mid Rail Gantry waterjet system is available in 5’x5’, 8’x5’, and 21’x5’, 8’X13’ and 21’X13’ and 5’x13’ work envelopes.
Jet Edge’s Mid Rail Gantry Waterjet System is proudly made in the U.S.A.
More Information
For more information about Jet Edge, visit www.jetedge.com, e-mail sales@jetedge.com, call 1-800-JET-EDGE (538-3343) or 763-497-8700. For more information about the WJTA-IMCA Expo, visit www.wjta.org, e-mail wjta@wjta.org or call 314-241-1445.
JET EDGE INFO REQUEST FORM
About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops. Jet Edge waterjet systems are proudly made in the U.S.A. For more information about Jet Edge, visit http://www.jetedge.com/, e-mail sales@jetedge.com or call 1-800-JET-EDGE (538-3343).
Wednesday, May 12, 2010
Pneumatic Drill for Water Jet Cutting Materials Prone to Delaminiation
Jet Edge's Pneumatic Drill for water jet cutting systems gives water jet operators the opportunity to expand their water jet cutting capabilities and take in new types of work by enabling them to quickly pierce sensitive materials prior to waterjetting them. It also can be used for reaming holes to a precise diameter. The drill works with all waterjets.
PRODUCT SPECIFICATIONS
INFORMATION REQUEST FORM
PRODUCT SPECIFICATIONS
INFORMATION REQUEST FORM
Subscribe to:
Posts (Atom)
Posts
